Blomberg
Door Lock Mechanism Stuck
Dryer door will not unlock at the end of the cycle; clothes are trapped inside.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Mechanical jam in door interlock, Swollen or misaligned door gasket, Faulty door lock solenoid, Control board not sending unlock signal
How to Fix / Troubleshooting
Safety first: Unplug the dryer before attempting to force the door open. Do not use excessive force that could break the glass or hinges.
A stuck door lock can often be released manually.
- Wait for cool-down: Some locks remain engaged until the drum cools. Wait 5–10 minutes and try again.
- Gentle pressure: Press inward on the door while lifting the handle to relieve pressure on the latch.
- Manual release (if accessible): Remove the top panel and look down at the door lock area. Some locks have a manual release tab that can be pulled to open the door.
- Inspect and replace lock: Once open, remove the front panel and examine the door lock assembly. If it is physically damaged or does not actuate properly, replace it.
- Control issue: If the lock is mechanically sound but remains energized, the control board may be faulty and require professional service.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Interlock Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements