Bosch Water Leak / Condensate Handling Fault

Bosch dryer leaks water onto the floor during or after a cycle (condensation/heat pump models).

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Clogged condenser, Blocked condensate drain hose, Misaligned or cracked water tank, Leaking pump or hose connection

Safety first: Unplug the dryer and mop up any standing water to prevent slipping.

Check water container: Remove and empty the condensate tank. Inspect for cracks and ensure it seats properly when reinstalled.
Clean condenser: Remove the condenser unit and rinse thoroughly to clear lint that can cause overflow.
Inspect hoses and pump: Access the base area and check all hoses from the sump to the tank or drain for cracks or loose clamps. Tighten or replace as needed.

Run a short cycle and monitor for leaks to confirm the repair.

Medium 3/5

Condensate Drain Hose

Check Price on Amazon

We may earn a commission from links on this page.