Brandt Condensate Collection / Pumping Issue

Condenser dryer collects little or no water in tank, but clothes remain damp

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blocked condensate channel, Failed drain pump, Disconnected or kinked internal drain hose, Water leaking into base instead of tank

Safety first: Unplug the dryer before removing panels or the condenser.

Steps:

1. Clean condenser and channel: Remove the condenser and clean the channel beneath it of lint and debris.
2. Check tank seating: Ensure the water tank is fully inserted and correctly positioned to receive water.
3. Inspect internal hoses and pump: Remove side panel to access the pump and hoses. Clear any blockages and ensure hoses are not kinked.

Medium 3/5

Condensate Drain Pump

Check Price on Amazon

We may earn a commission from links on this page.