Brandt
Door Interlock Stuck Closed
Dryer door will not open after cycle ends
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Mechanical jam in door lock, Swollen or warped door seal, Faulty door interlock mechanism, Control board not releasing lock (if electronically controlled)
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker and unplug the dryer before attempting to release the door.
Steps:
- 1. Wait and cool: Allow the dryer to cool for 10–15 minutes; some locks release after temperature drops.
- 2. Gentle pressure: Press the door inward while pulling the handle to relieve pressure on the latch.
- 3. Manual release: On some models, a manual release tab is accessible by removing the top panel and reaching down to the door lock. Pull the tab to open the door.
- 4. Replace faulty lock: If the lock repeatedly sticks, replace the door lock assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Lock Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements