Brandt
Worn Drum Rear Bearing or Flat-Spotted Rollers
Dryer makes loud rumbling or thumping noise, especially with light loads
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn rear drum bearing, Flat spots on support rollers from long-term storage, Loose drum baffles inside drum
How to Fix / Troubleshooting
Safety first: Disconnect power before opening the cabinet.
Steps:
- 1. Check load: Ensure the drum is not underloaded with a single heavy item (e.g., one towel), which can cause thumping. Add more items to balance.
- 2. Inspect rear bearing: Remove the drum as per service instructions. Check the rear bearing ball or sleeve and its support bracket for wear or play. Replace if worn.
- 3. Inspect rollers: Check drum support rollers for flat spots or damage. Replace as a set if worn.
- 4. Check drum baffles: From inside the drum, ensure the plastic or metal baffles are firmly attached. Tighten screws if loose.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Drum Rear Bearing Kit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements