Brandt Drum Rubbing on Cabinet or Foreign Object in Drum Seal

Dryer produces grinding or scraping noise when running

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Worn or displaced front felt seal, Foreign object (coin, bra wire) caught between drum and front panel, Misaligned drum due to worn bearing

How to Fix / Troubleshooting

Safety first: Unplug the dryer before inspection.

Steps:

  • 1. Visual check inside drum: Look for loose objects in the drum holes or around the door opening.
  • 2. Inspect front seal: Remove the front panel to access the front felt seal. Remove any trapped objects and check if the felt is intact and glued in place.
  • 3. Replace felt seal if needed: Peel off the old felt, clean the surface, apply high-temperature adhesive, and fit a new Brandt-compatible felt seal.
  • 4. Check drum alignment: Ensure the drum sits evenly in the front and rear supports. If misaligned, inspect rear bearing and rollers.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Front Drum Felt Seal
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements