Brandt
Motor Overheating / Thermal Protector Trip
Dryer stops mid-cycle and will not restart until it cools down
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blocked airflow causing motor to overheat, Worn motor bearings, Overloaded drum, Failing motor winding
How to Fix / Troubleshooting
Safety first: Unplug the dryer and allow it to cool before inspection.
Steps:
- 1. Reduce load size: Avoid overloading the drum; large heavy loads strain the motor.
- 2. Clean airflow paths: Ensure lint filter, exhaust duct, and internal ducts are clean to reduce motor temperature.
- 3. Inspect motor: Access the motor and check for excessive dust buildup. Spin the motor shaft; if stiff or noisy, the motor may be failing and should be replaced.
- 4. Check drum supports: Worn rollers or bearings can increase motor load; replace if necessary.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements