Bush dryer drum light works and display is on, but pressing start only causes a click with no drum movement.

Safety first: Unplug the dryer before accessing the motor or capacitor.

• Spin drum test: Try turning the drum by hand. If it is stiff, investigate bearings and supports. If it turns freely, suspect the capacitor or motor.
• Locate and inspect capacitor: Find the motor start capacitor near the motor. Look for bulging or leakage. Replace if visibly damaged.
• Test capacitor: Use a capacitance meter to verify its value against the rating printed on the case. Replace if out of tolerance.
• Check motor connections: Ensure the motor plug is secure and wires are intact.