Bush
Drum Support / Bearing or Roller Wear
Bush dryer is running but makes a loud banging or thumping noise during operation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn rear drum bearing, Flat-spotted or worn drum support rollers, Loose drum baffle, Foreign object trapped in drum
How to Fix / Troubleshooting
Safety first: Unplug the dryer before removing panels or reaching inside the drum cavity.
- Check load: Stop the dryer and redistribute the clothes. Large items can cause temporary thumping.
- Inspect drum baffles: Look inside the drum at the lifters/baffles. Tighten any loose screws and remove trapped objects.
- Access rear bearing/rollers: Remove the rear panel to inspect the drum support. Spin the drum by hand and listen for grinding. Replace worn bearing kits or rollers as needed.
- Check for metal-on-metal contact: Ensure the drum is not rubbing on the cabinet edges due to worn supports.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Drum Bearing Kit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements