Café
No Power to Control / Internal Fuse or Board Failure
Dryer display is completely dead but outlet has power
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open internal line fuse (if equipped), Failed main control board, Loose harness at control, Damaged power cord or terminal block
How to Fix / Troubleshooting
Safety first: Turn off the breaker and unplug the dryer before internal checks. This involves high voltage; if unsure, contact a professional.
- Verify outlet power: Confirm correct voltage at the outlet with a multimeter.
- Inspect terminal block: Remove the rear cover and check for burned or loose connections at the terminal block.
- Check internal fuse: Some Café dryers have an internal line fuse on the control board or wiring harness. Test for continuity and replace if open.
- Inspect control board: Access the main control board and look for visible damage. If the board is not receiving power or is visibly damaged, replace it.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements