Fisher & Paykel
Worn Drum Support Rollers / Idler Pulley
Dryer makes loud squealing or screeching noises during operation
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Dry or worn drum rollers, Worn idler pulley bearing, Misaligned drum, Damaged drive belt
How to Fix / Troubleshooting
Safety first: Unplug the dryer before disassembly. Wear gloves to protect against sharp edges.
- 1. Isolate noise: Run the dryer briefly to identify the noise location (front, rear, or bottom), then unplug.
- 2. Access drum supports: Remove the top and front panels to expose the drum, rollers, and idler pulley.
- 3. Inspect rollers: Spin each drum roller by hand. Replace any that are noisy, wobble, or have flat spots.
- 4. Check idler pulley: Spin the idler pulley. Replace if it squeals, feels rough, or is seized.
- 5. Inspect belt: Replace a cracked or glazed belt with a Fisher & Paykel-compatible drive belt.
- 6. Reassemble and test: Refit panels and run a test cycle to confirm the noise is resolved.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Drum Support Rollers
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements