E8C
Frigidaire
Low line voltage or power supply problem
Frigidaire dryer shows E8C and may shut down or fail to start; often associated with power issues.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Incorrect supply voltage at outlet, Loose power cord connections at terminal block, Failing house breaker, Damaged power cord
How to Fix / Troubleshooting
Safety First: Turn off the breaker before inspecting the terminal block. Use extreme caution when measuring live voltage.
- Verify supply voltage:
- With a multimeter and breaker ON, measure voltage at the dryer outlet.
- For electric dryers, you should see ~240V across the two hot legs and ~120V from each hot to neutral.
- Inspect power cord and terminal block:
- Turn breaker OFF and unplug the dryer.
- Remove the terminal block cover at the back of the dryer.
- Check for loose screws, burnt wires, or melted plastic.
- Tighten any loose connections and replace burnt components or the power cord if damaged.
- Check breaker and wiring:
- Ensure the double-pole breaker is not weak or tripping frequently; replace if necessary.
- If you suspect house wiring issues, contact a licensed electrician.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Power Cord and Terminal Block
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements