Frigidaire
No power to control – electrical supply or control board failure
Frigidaire dryer display is dead; no lights or response when pressing buttons.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped breaker or blown fuse, Loose power cord connection, Failed main control board, Open thermal limiter on some models feeding control
How to Fix / Troubleshooting
Safety First: Turn off the breaker before inspecting the terminal block or internal wiring.
- Check house power:
- Verify the dryer breaker is on and not tripped.
- Test the outlet for correct voltage.
- Inspect power cord and terminal block:
- Unplug the dryer and remove the terminal block cover.
- Check for loose or burnt connections; repair or replace as needed.
- Check internal fuses/limiters:
- Some Frigidaire models have internal fuses feeding the control; test for continuity and replace if open.
- Control board:
- If power is present at the control but the display is dead, replace the main control board.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements