Frigidaire
Drum support friction – worn rollers, idler pulley, or glides
Frigidaire dryer drum turns but there is a loud squealing or screeching noise during operation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn drum support rollers, Worn idler pulley bearing, Worn front drum glides, Dry or seized roller shafts
How to Fix / Troubleshooting
Safety First: Unplug the dryer before disassembly.
- Isolate the noise:
- Run the dryer briefly and listen to determine if the noise is from the front, rear, or bottom.
- Inspect drum supports:
- Remove the front panel and drum (note belt routing).
- Spin each drum roller by hand; they should turn smoothly and quietly.
- Replace any rollers that wobble, are flat-spotted, or squeal.
- Check idler pulley:
- Spin the idler pulley; if noisy or rough, replace it.
- Inspect front glides:
- Check the front drum glides (felt or plastic pads) for wear through to the metal.
- Replace worn glides and the felt seal if damaged.
- Lubrication:
- Do not use oil or grease on rollers or idler; they are designed to run dry. Replace rather than lubricate.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Drum Support Roller Kit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements