Dryer display works but some buttons or touch areas do not respond.

Safety first: Unplug the dryer before removing the control panel.

• Power reset: Disconnect power for a few minutes and reconnect to rule out a temporary software glitch.
• Inspect control panel: Remove the top cover and gently remove the control fascia. Check the ribbon cable between the touch panel and UI board.
• Check for moisture: Look for signs of condensation or spills inside the panel. Dry thoroughly if present.
• Test buttons: If using mechanical buttons, test them with a multimeter for continuity when pressed. Replace the UI board or fascia if defective.
• Reassemble and test: After reseating cables or replacing parts, test all functions.