GE Profile
Start Circuit or Door Interlock Failure
Dryer will not start; display is on but pressing Start does nothing.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Defective start switch (mechanical models), Faulty door switch, Broken belt switch (if equipped), Failed relay on main control board
How to Fix / Troubleshooting
Safety first: Unplug the dryer.
Step-by-step checks:
- Door switch: Confirm the drum light turns off when the door is closed. If not, test and replace the door switch.
- Start switch (knob models): Remove the control panel back cover and test the start switch for continuity when pressed. Replace if open.
- Belt switch: On models with a belt switch, verify continuity when the belt is tensioned.
- Control board: If all switches test good, the main control board may not be energizing the motor relay and may need replacement.
Tip: Listen for a click from the control when pressing Start; absence can indicate a board issue.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements