tE2
GE Profile
Thermistor Short Circuit (Temperature Sensor Error)
GE Profile dryer displays tE2 and may overheat or shut down quickly.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Shorted thermistor, Thermistor wires shorted together, Moisture in thermistor connector, Failed main control board
How to Fix / Troubleshooting
Safety first: Unplug the dryer and let it cool.
Step-by-step checks:
- Inspect wiring: Locate the thermistor and inspect its wiring for pinched or bare wires touching each other or the cabinet.
- Resistance test: Disconnect the thermistor and measure resistance. A reading near 0 ohms indicates a shorted sensor.
- Replace thermistor: Install a new OEM thermistor if shorted. Ensure wires are routed away from sharp edges.
- Control board: If a known-good thermistor still reads as shorted to the board, the control board may be faulty.
Tip: Moisture intrusion can temporarily short connectors; ensure the area is dry.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Outlet Thermistor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements