Grundig Display / User Interface Fault

Dryer display is dim, flickering, or some segments are not visible

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Aging or damaged display module, Loose ribbon cable, Faulty user interface PCB, Power supply instability

Safety first: Unplug the dryer before removing the control panel.

Access control panel: Remove the top cover and screws securing the front control panel. Carefully pull it forward.
Check ribbon cable: Reseat the ribbon cable between the display and the main/user interface board.
Inspect for damage: Look for corrosion or cracks on the display PCB. Replace the display module or entire control panel if damaged.
Test operation: Reassemble and power on the dryer to check if the display is now stable.

Medium 3/5

Display / User Interface Board

Check Price on Amazon

We may earn a commission from links on this page.