Grundig
Door Lock Stuck or Control Board Not Releasing Lock
Dryer door will not open at the end of the cycle; door appears locked
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Mechanical jam in door lock, Faulty door interlock, Control board not sending unlock signal, Swollen door seal causing pressure
How to Fix / Troubleshooting
Safety first: Switch off and unplug the dryer. Allow it to cool before attempting to force the door.
- Wait a few minutes: Some models delay door unlocking for safety. Wait 2–5 minutes after the cycle ends.
- Check for drum pressure: Gently press on the door while trying to open it to relieve pressure on the latch.
- Manual release: Many Grundig dryers have a manual door lock release accessible through the filter flap or lower panel. Consult the user manual and pull the release tab to open the door.
- Inspect door lock: Once open and unplugged, remove the front panel to access the door lock. Check for broken plastic parts or burnt contacts. Replace the door lock assembly if defective.
- Test operation: Reassemble and run a short cycle to confirm the door now unlocks correctly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Lock Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements