HE
Haier
Heating Error (Electric Heater Models)
Haier dryer displays HE and does not heat or stops heating during cycle
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open heating element, Blown thermal fuse, Failed high-limit thermostat, Faulty heater relay on control board
How to Fix / Troubleshooting
Safety first: Unplug the dryer and allow it to cool before accessing heater components.
- Check venting: Before opening the dryer, inspect and clean the exhaust vent and lint filter to ensure proper airflow.
- Access heater assembly: Remove the rear panel to reach the heater housing, thermal fuse, and thermostats.
- Test thermal fuse and thermostats: Use a multimeter to check continuity. Replace any open components.
- Test heating element: Disconnect the element leads and measure resistance. An open circuit indicates a failed element that must be replaced.
- Inspect control board: If all heater components are good, the heater relay on the main board may be faulty. Replace the control board if necessary.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Heating Element Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements