Haier
No Power / Dead Appliance
Haier dryer will not start at all; no lights or display, completely dead
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped breaker or blown fuse, Faulty power cord, Burnt terminal block, Failed main control board power supply
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker before inspecting the terminal block.
- Verify outlet power: Plug another appliance or a tester into the outlet to confirm power is present.
- Check breaker/fuse: Reset any tripped breakers and replace blown fuses. Ensure the dryer is on a dedicated circuit.
- Inspect power cord and plug: Look for damage, burns, or loose connections. Replace if defective.
- Check terminal block: Remove the rear cover and inspect the terminal block where the cord connects. Tighten loose screws and replace burnt parts.
- Control board: If power is present at the terminal block but the dryer is dead, the main control board or internal fuse may be faulty and require replacement.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements