Dryer door will not open after cycle ends
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Switch off and unplug the dryer. Do not force the door open with excessive strength as this may damage the cabinet.
- Wait for cool-down: Some models keep the door locked until temperature drops. Wait 5–10 minutes and try again.
- Gentle pressure: Press the door inward while pulling the handle to relieve pressure on the latch.
- Manual release (if available): Check the user manual for a manual door release accessible through the filter opening or lower panel.
- Access lock from front: If still stuck, remove the top cover and front panel screws to reach the lock and manually release the latch.
Replace the door lock assembly if it repeatedly sticks. If the lock is not being de-energized, the control board may be at fault.
Repair Difficulty
Required Part
We may earn a commission from links on this page.