Hisense Start Circuit / Motor Drive Fault

Dryer will not start at all; display is on and buttons respond, but pressing start does nothing and no code appears.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Faulty start button contact, Defective door switch, Failed motor relay on main PCB, Open motor winding

Safety first: Unplug the dryer before testing continuity or accessing the PCB.

Confirm door closure: Ensure the door is fully closed and the door switch clicks.
Test door switch: Check continuity while pressing the switch. Replace if it does not change state.
Check start button: If accessible, test the start button contacts on the control panel for continuity when pressed.
Inspect motor and relay: Access the main PCB and motor. Check for burnt relay contacts or damaged wiring. Test motor windings for continuity. Replace faulty components.

Medium 3/5

Main Control Board (PCB)

Check Price on Amazon

We may earn a commission from links on this page.