E17
Hoover
Ambient Sensor / Internal Humidity Sensor Fault
Dryer shows E17; may be related to humidity or ambient sensor issues on advanced models
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty ambient temperature or humidity sensor, Disconnected sensor harness, Sensor shorted by condensation, Control board sensor input failure
How to Fix / Troubleshooting
Safety first: Unplug the dryer before accessing internal sensors.
- Locate ambient sensor: On some Hoover models, a small sensor is mounted near the air intake or control panel area. Refer to service documentation if available.
- Check connection and condition: Ensure the sensor plug is secure and free from corrosion or moisture. Dry any condensation.
- Measure sensor values: Use a multimeter to check resistance according to service specs. Replace the sensor if readings are out of range.
- Board check: If the sensor and wiring are good, the main PCB may be at fault and require replacement.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Ambient Sensor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements