Hotpoint-Ariston Drum Misalignment / Seal Damage

Dryer door seal shows signs of black marks or melting, and clothes may snag at the door opening.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn front felt seal, Bent drum support, Overloaded drum causing excessive flex, Foreign object trapped at front edge

Safety first: Unplug the dryer before removing the front panel.

Inspect seal: Remove the front panel and examine the felt seal around the drum opening. Replace if burnt, torn, or worn through.
Check drum position: Verify that the drum sits centrally in the opening and does not rub heavily on one side. Inspect supports and rear bearing for wear.
Remove debris: Clear any foreign objects trapped between the drum and front panel.
Avoid overloading: Reduce load sizes to prevent excessive drum flex that can damage the seal.

Medium 3/5

Front Felt Seal

Check Price on Amazon

We may earn a commission from links on this page.