Safety first: Unplug the dryer before opening any panels. Sharp edges inside the cabinet.

Steps to check:

Check drum rotation by hand: Open the door and try to turn the drum clockwise by hand. It should move smoothly. If it is very stiff or jammed, suspect bearings or a foreign object.
Inspect belt: Remove the top cover and, if needed, the rear panel. Check that the drum belt is intact, correctly routed around the motor pulley and idler pulley, and not jammed.
Look for obstructions: Check between drum and cabinet edges for trapped clothing, bra wires, or screws that can lock the drum.
Check motor capacitor (if fitted): On some Hotpoint dryers, a start capacitor is mounted near the motor. Look for bulging, leaking, or burnt smell. Replace if suspect.
Test motor: With the belt removed, see if the motor shaft spins freely by hand. If stiff, noisy, or seized, the motor likely needs replacement.

Note: Motor and bearing replacement require significant disassembly; if unsure, contact a professional.

Dryer drum does not rotate, humming noise from motor area, display shows F02

Possible Causes