E16
Ikea
Communication Error Between Main Control and Sub-Board
Dryer shows E16, often related to internal communication between boards
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose harness between boards, Faulty sub-board (e.g., motor control), Electrical noise or surge damage, Incorrect replacement board
How to Fix / Troubleshooting
Safety first: Unplug the dryer before accessing internal electronics.
- Locate all control boards: Many Ikea dryers have a main control board and a separate motor or power board. Identify both.
- Reseat connectors: Disconnect and reconnect all multi-pin connectors between the boards. Inspect for bent pins or corrosion.
- Check for burnt components: Look for discoloration or burnt smell on any board. Replace any obviously damaged board.
If E16 persists after reseating connectors, one of the boards is likely defective. Board-level diagnosis is advanced; consider professional service.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Motor Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements