Indesit dryer door gets very hot to the touch during operation
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Turn off and unplug the dryer; allow it to cool before touching metal parts.
Improve front airflow:
- Clean lint filter and housing: Remove all lint from the filter and the cavity it sits in.
- Inspect front air channels: Remove the front panel if necessary and clean any lint build-up around the door opening and front ducting.
- Check door seal: Inspect the door gasket for gaps, tears, or deformation. Replace if damaged so hot air does not leak directly onto the door frame.
Monitor: After cleaning and seal replacement, run a short cycle and check if the door temperature is reduced to a warm but safe level.
Repair Difficulty
Required Part
We may earn a commission from links on this page.