Indesit Overheating Motor or Thermal Overload Trip

Indesit dryer stops mid-cycle and all lights go off; requires time before it will start again

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Blocked airflow causing high internal temperature, failing drive motor overheating, obstructed drum rotation, faulty motor thermal protector

How to Fix / Troubleshooting

Safety first: Unplug the dryer and allow it to cool for at least 30 minutes.

Check for overheating causes:

  • Clean airflow path: Clean lint filter, condenser, and exhaust duct thoroughly.
  • Check drum movement: Rotate the drum by hand to ensure it turns freely. If stiff, inspect bearings and belt for binding.
  • Inspect motor: Access the motor and check for lint build-up around it. Clean carefully. If the motor is extremely hot or smells burnt, it may be failing.

Test operation: After cleaning and cooling, run a cycle. If the dryer still cuts out, the motor or thermal protector may need replacement by a technician.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Drive Motor Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements