JennAir
Drum Support or Idler Pulley Wear
Dryer makes a loud squealing or screeching noise while running.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn drum support rollers, Dry or failing idler pulley, Worn drum glides, Misaligned belt
How to Fix / Troubleshooting
Safety first: Unplug the dryer before disassembly. Wear gloves to protect against sharp edges.
- Isolate the noise: Run the dryer briefly and listen to determine if the noise comes from the front, rear, or bottom. Then unplug before opening.
- Inspect drum rollers: Remove the front panel and drum to access the rear rollers. Spin each roller by hand; replace any that squeal, wobble, or feel rough.
- Check the idler pulley: Spin the idler pulley; if it squeaks or feels stiff, replace it.
- Examine drum glides: At the front bulkhead, inspect the drum glides or slides. Replace if worn through or missing.
- Install a maintenance kit: For older JennAir dryers, consider installing a drum support maintenance kit that includes rollers, idler, and belt to restore quiet operation.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Drum Support Roller Kit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements