Kenmore Thermistor Shorted or Out of Range Low

Dryer displays E2 and may shut off quickly or not heat properly

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Shorted thermistor, wiring short to ground, moisture in thermistor connector, failed control board

Safety First: Disconnect power and gas before opening the cabinet.

Steps:

Inspect thermistor area: Check for moisture, lint, or debris around the thermistor and connector.
Test resistance: Remove one wire and measure thermistor resistance. A very low reading (near 0 ohms) indicates a short.
Check harness: Look for pinched or bare wires touching metal.
Replace thermistor: Install a new thermistor and secure wiring away from sharp edges.

Medium 3/5

Exhaust Thermistor

Check Price on Amazon

We may earn a commission from links on this page.