Logik Moisture Sensor Not Detecting Dryness

Dryer continues running for a very long time on sensor programs and clothes become over-dry

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Moisture sensor bars shorted by residue, Sensor wiring shorted, Faulty moisture sensor module, Control PCB not interpreting sensor correctly

Safety first: Unplug the dryer before internal inspection.

Clean sensor bars thoroughly: Remove any residue from the sensor bars using a non-abrasive cleaner. Ensure they are not bridged by lint or detergent film.
Inspect for shorts: Check that no metal objects (e.g., bra wires) are stuck across the bars.
Check wiring: Inspect the sensor wiring for damage or pinched sections that could cause a short circuit.
Use timed cycles: Until the sensor circuit is repaired, use timed drying to avoid over-drying.

Medium 3/5

Moisture Sensor Bars

Check Price on Amazon

We may earn a commission from links on this page.