Maytag
Worn Drum Glides or Front Felt Seal
Dryer drum turns but there is a scraping or grinding noise, often from the front of the drum.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn-through drum glides, Torn front felt seal, Foreign object caught between drum and front bulkhead, Misaligned drum
How to Fix / Troubleshooting
Safety First: Unplug the dryer before disassembly.
- Step 1 – Inspect drum front edge: Open the door and look at the front lip of the drum for rough spots or metal-on-metal contact.
- Step 2 – Remove front panel: Access the front bulkhead and inspect the drum glides and felt seal. Replace glides that are worn through or missing and any torn felt seals.
- Step 3 – Remove debris: Check for coins, screws, or other objects trapped between the drum and bulkhead. Remove any debris.
- Step 4 – Reassemble and test: After replacing worn parts, reassemble the dryer and run a cycle to confirm the scraping noise is gone.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Drum Glide Kit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements