Midea Worn Drum Support Rollers / Idler Pulley

Dryer drum turns but there is a loud squealing or screeching noise

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Worn drum rollers, Dry or seized idler pulley, Worn drum glides, Misaligned drum

How to Fix / Troubleshooting

Safety first: Unplug the dryer before disassembly. Wear gloves to avoid cuts from sharp metal.

  • Isolate the noise: Run the dryer briefly and listen to determine if the noise is from the front, rear, or bottom. Then disconnect power.
  • Access drum supports: Remove the top and front panel to expose the drum, rollers, and idler pulley.
  • Inspect rollers: Spin each drum roller by hand. If they squeal, wobble, or feel rough, replace them as a set.
  • Check idler pulley: Spin the idler. If noisy or stiff, replace it. Do not lubricate with oil; use only manufacturer-approved parts.
  • Inspect drum glides: If your Midea model uses front glides, check for wear through to the backing. Replace if worn.

Reassemble carefully, ensuring the belt is routed correctly around the motor and idler. Test for quiet operation.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Drum Roller and Idler Pulley Kit
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements