Midea
Drum Glide / Front Bearing Wear
Dryer produces a grinding or scraping noise during operation
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn front drum glides, Damaged front felt seal, Misaligned drum front bulkhead, Foreign object between drum and front panel
How to Fix / Troubleshooting
Safety first: Unplug the dryer before removing the front panel.
- Stop use immediately: Grinding can quickly damage the drum and front bulkhead.
- Remove front panel: Access the front drum support area. Inspect the plastic or Teflon glides and felt seals.
- Replace worn glides: If glides are worn through or missing, replace them as a set. Clean the mounting surface before installing new glides.
- Inspect felt seals: Replace torn or missing felt seals to prevent metal-on-metal contact and air leaks.
- Check for debris: Remove any foreign objects caught between the drum and front panel.
After repair, rotate the drum by hand to ensure smooth, quiet movement before restoring power.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Drum Glide and Felt Seal Kit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements