Monogram Misaligned Door or Worn Front Drum Glide

Dryer door is hard to open or close, scraping noise at the front

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Bent door hinge, Worn front drum glide or bearing, Foreign object at front drum edge, Warped front panel

Safety first: Unplug the dryer before adjusting or removing the door.

Inspect hinges: Check door hinges for bending or looseness. Tighten screws and replace bent hinges.
Check front glide: Remove the front panel and inspect the front drum glide or bearing strip. Replace if worn through or missing.
Remove obstructions: Look for objects caught between the drum and front bulkhead and remove them.
Test operation: Reassemble and verify the door opens and closes smoothly without scraping.

Medium 3/5

Front Drum Glide

Check Price on Amazon

We may earn a commission from links on this page.