Monogram
Worn Drum Support Rollers or Drum Glides
Dryer makes loud rumbling or thumping noises during operation
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Flat-spotted drum rollers, Worn drum glides or slides, Debris caught between drum and bulkhead, Worn roller shafts
How to Fix / Troubleshooting
Safety first: Unplug the dryer before disassembly. Wear gloves to avoid cuts on sharp metal edges.
- Isolate noise: Run the dryer empty to confirm the noise is not load-related. If noise persists, proceed.
- Access drum supports: Remove the front panel and drum to expose the drum rollers and glides.
- Inspect rollers: Check each roller for flat spots, cracks, or wobble. Spin them by hand; they should turn smoothly. Replace rollers and, if needed, roller shafts as a set.
- Inspect glides: On models with front drum glides, inspect for heavy wear or missing Teflon pads. Replace worn glides.
- Clean debris: Remove any foreign objects or lint buildup from around the drum edges and bulkhead.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Drum Support Roller Kit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements