Monogram
Temperature Regulation Problem
Dryer stops with clothes very hot and wrinkled, cycle seems too hot
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed cycling thermostat stuck closed, Incorrect cycle or temperature selection, Blocked exhaust vent causing high internal temps, Faulty thermistor reading low
How to Fix / Troubleshooting
Safety first: Unplug the dryer and allow it to cool before inspection.
- Check settings: Ensure you are using appropriate temperature and fabric settings for the load.
- Clean venting: Verify that the lint filter and exhaust vent are clean and unobstructed.
- Test cycling thermostat: Access the thermostat on the blower housing and test for proper operation according to Monogram specs. Replace if stuck closed or out of range.
- Check thermistor: Test the exhaust thermistor resistance at room temperature and replace if out of specification.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Cycling Thermostat
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements