Rangemaster
Door Interlock Stuck Closed
Dryer door will not open at the end of the cycle; door appears locked even though the machine is off.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Mechanical jam in door lock, Swollen or warped door catch, Faulty door lock solenoid not releasing, Control board not removing power from lock
How to Fix / Troubleshooting
Safety first: Switch off and unplug the dryer. Do not force the door open with excessive strength as this can damage the cabinet.
- Wait for cool-down: Some models keep the door locked for a short time after the cycle. Wait 5–10 minutes and try again.
- Gentle pressure: Press the door firmly closed and then try opening again to relieve pressure on the latch.
- Manual release (if available): Check the user manual for a manual door release. This is sometimes accessible through the filter opening or lower panel.
- Access door lock from top/front: Remove the top cover and, if necessary, the front panel screws to reach the door lock. Carefully release the latch from inside while supporting the door.
- Replace faulty lock or catch: If the lock mechanism is jammed or the catch is deformed, replace the door lock assembly and/or door catch.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Lock Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements