Siemens
Electrical Short or Overload
Dryer causes circuit breaker to trip intermittently
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Shorted heater element, Moisture in electrical connections, Faulty motor, Damaged mains cable
How to Fix / Troubleshooting
Safety first: Do not repeatedly reset a tripping breaker. Unplug the dryer and investigate.
- Inspect power cord and plug: Look for damage, burns, or melted areas. Replace if any defects are found.
- Check for moisture: Inspect the base and internal wiring for signs of water ingress. Dry thoroughly and fix any leaks.
- Test heater and motor: Use a multimeter to check for shorts to ground on the heater and motor. Replace any component that shows continuity to chassis.
- Professional testing: If no obvious fault is found, have a qualified technician perform insulation resistance tests and further diagnostics.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Heater Element Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements