E15
Siemens
Internal Leak / Water in Base Tray Fault
Dryer shows E15; may be associated with internal leak detection on some models
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Leaking condensate hose or pump, Cracked water tank or sump, Loose hose clamp inside cabinet, Activated base tray float switch
How to Fix / Troubleshooting
Safety first: Unplug the dryer. Water inside the base can contact live parts.
- Check for visible leaks: Pull the dryer out and inspect underneath and behind for water traces.
- Remove side or front panel: Access the base tray area. If water is present, carefully soak it up with towels or a sponge.
- Inspect hoses and joints: Follow the condensate path from the drum to the sump, pump, and tank. Tighten any loose hose clamps and replace cracked hoses.
- Check pump and sump: Look for cracks in the pump housing or sump. Replace any damaged plastic components.
- Reset float switch: Once the base is dry and the leak is fixed, the float switch will reset. Reassemble and test for further leaks during a short cycle.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Condensate Hose / Sump Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements