SMEG
Drum Support / Suspension Noise
Dryer makes loud banging or thumping noises during operation, especially with larger loads.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn drum support rollers, Flattened roller surfaces from long-term storage, Worn front drum glides or felt seal, Out-of-round drum or loose baffles
How to Fix / Troubleshooting
Safety first: Disconnect power before removing the top or front panel. Rotating parts can cause injury.
- Check load distribution: Stop the dryer and redistribute the load. Single heavy items (e.g., duvet) can cause banging.
- Inspect drum rollers: Remove the front panel and rotate the drum while observing the rollers. Replace any rollers that are flat-spotted, cracked, or noisy.
- Check front glides/felt: Inspect the front drum support glides or felt ring for wear or missing sections. Replace if worn through or detached.
- Inspect drum baffles: Check the internal drum lifters/baffles for looseness. Tighten screws or replace damaged baffles.
- Test run: After replacing worn components, run the dryer empty to confirm noise reduction before returning to normal use.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Drum Support Roller Kit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements