E19
SMEG
Earth Leakage / Ground Fault
Dryer displays E19; may coincide with tripping of the household circuit breaker or RCD.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Heater element shorted to chassis, Motor winding insulation breakdown, Damaged mains cable or filter, Moisture ingress causing leakage to ground
How to Fix / Troubleshooting
Safety first: This fault can indicate a serious electrical hazard. Unplug the dryer immediately and do not use it until the fault is identified and corrected.
- Visual inspection: With power disconnected, remove the rear panel and inspect the heater, motor, and wiring for signs of burning, melted insulation, or moisture.
- Insulation testing (advanced): Using an insulation resistance tester (megohmmeter), check resistance between live parts (heater terminals, motor windings) and chassis ground. Low resistance indicates leakage and the component must be replaced.
- Check mains cable and filter: Inspect the power cord and EMI filter for cuts, crushing, or burn marks. Replace if damaged.
- Dry moisture: If moisture is present inside the cabinet, identify and fix the source (e.g., leaks) and allow the unit to dry completely before retesting.
- Professional service: If you are not equipped to perform insulation tests, contact a qualified technician. Do not bypass safety devices.
Advertisements
Repair Difficulty
Professional Required
5/5
Advertisements