Speed Queen
Heating System Failure (Electric Models)
Dryer runs but does not heat (no error code displayed)
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open heating element, Blown thermal fuse on blower housing, Failed high-limit thermostat, One leg of 240V power missing at supply
How to Fix / Troubleshooting
Safety first: Turn off the breaker and unplug the dryer before testing or disassembly.
Step-by-step checks:
- Verify power supply: For electric dryers, a missing leg of 240V can cause the motor to run with no heat. Have a qualified person measure voltage at the outlet and terminal block.
- Check thermal fuse: Access the blower housing and test the thermal fuse for continuity. Replace if open, and correct any airflow issues that caused it to blow.
- Test high-limit thermostat: Check for continuity at room temperature. Replace if open.
- Inspect and test heater: Remove the heater assembly and test the element for continuity. Replace if open or visibly broken.
When to call a technician: If you are not comfortable working with 240V circuits, contact a professional.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Heating Element
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements