E14
Speed Queen
Start Switch / Start Circuit Fault
Dryer displays E14, may not start or may shut down when Start is pressed
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Defective Start button or switch, Broken Start switch wiring, Failed control board Start input, Stuck relay on control board
How to Fix / Troubleshooting
Safety first: Unplug the dryer before removing the control panel.
Step-by-step checks:
- Check button feel: Press the Start button and feel for a positive click. A mushy or stuck button may indicate a failed switch.
- Access Start switch: Remove the control console to expose the Start switch or keypad board. Inspect for physical damage or burnt areas.
- Test switch: If it is a mechanical switch, disconnect the wires and test for continuity while pressing the button. Replace if it does not close properly.
- Inspect wiring and board: Check the harness from the Start switch to the main control. If wiring is good and the switch tests fine, the control board's Start input or relay may be defective and require replacement.
When to call a technician: If the Start function is integrated into a complex touchpad or UI board, replacement may be best handled by a professional.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements