E17
Speed Queen
Flame Sensing / Flame Stability Error
Dryer shows E17, burner lights but goes out quickly or cycles erratically (gas models)
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Dirty or misaligned flame sensor, Restricted burner orifice, Poor gas pressure or supply, Faulty gas valve assembly
How to Fix / Troubleshooting
Safety first: Turn off gas and power before disassembling the burner assembly.
Step-by-step checks:
- Clean flame sensor: Access the burner assembly and locate the flame sensor. Gently clean the sensor tip with fine steel wool to remove soot or oxidation.
- Inspect burner and orifice: Remove the burner tube and check for lint, rust, or debris. Clean the burner ports and orifice carefully without enlarging the opening.
- Check gas supply: Ensure the gas shutoff is fully open and that other gas appliances operate normally. Low pressure may require a gas utility check.
- Test operation: Reassemble and observe the burner. If the flame still drops out quickly and E17 returns, the gas valve assembly or control may be faulty.
When to call a technician: Flame stability issues can be complex and potentially dangerous; professional diagnosis is strongly recommended if cleaning does not resolve the problem.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements