Digital Bradley smoker display shows E7 and both heating and smoke generator functions are disabled.

Safety first: Unplug the smoker and smoke generator before disconnecting any cables.

Steps to troubleshoot E7:

• Check interconnect cable: Many Bradley digital smokers use a cable between the main control box and the smoke generator. Ensure both ends are fully seated and the cable is not pinched or cut.
• Inspect connectors: Look for corrosion, bent pins, or moisture inside the connectors. Clean gently with electrical contact cleaner and allow to dry completely.
• Try a different cable: If possible, substitute a known‑good interconnect cable to rule out a cable fault.
• Inspect smoke generator board: Remove the smoke generator cover and look for burnt components or loose connectors on its internal board. Reseat connectors.
• Replace faulty module: If the cable and connectors are good but E7 persists, the smoke generator control board or the main control box may be defective. Replace the smoke generator assembly or control box as indicated by further testing.