Smoker powers on but will not start a cook cycle when START is pressed

Safety first: Do not attempt to bypass safety switches.

Steps:

• 1. Confirm program settings: Ensure you have set a valid temperature and time (and probe target if using a meat probe). Some controllers will not start with invalid or zero values.
• 2. Check door closure: Close the door firmly and listen for any click from the door switch. Try pressing START again.
• 3. Test door switch: If accessible, test the door switch with a multimeter for proper operation. Replace if faulty.
• 4. Inspect keypad: If the START button feels mushy or unresponsive compared to other keys, the keypad may be worn. Replacement of the controller or keypad overlay may be required.
• 5. Reset controller: Unplug the smoker for 5 minutes, then plug back in and reprogram the cook cycle.