Dyna-Glo
Display Backlight / LED Failure
Control panel display is very dim or unreadable, but smoker still heats.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Aging or failed display backlight, Voltage drop in display power circuit, Moisture damage to display, Loose display connector
How to Fix / Troubleshooting
Safety first: Unplug the smoker before opening the control panel.
- Inspect display connector: Remove the control panel and reseat the connector that feeds the display module.
- Check for moisture: Dry any condensation and allow the panel to air dry thoroughly.
- Replace control panel assembly: If the display remains dim or unreadable, replace the entire control panel assembly, as the display is typically not serviced separately.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Control Panel Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements