GE Profile Mechanical Vibration or Fan/Auger Bearing Failure

Smoker makes loud rattling or grinding noise during operation.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Loose internal panels or racks, Worn convection fan motor bearings, Debris in fan blades, Jammed smoke generator auger (if equipped)

How to Fix / Troubleshooting

Safety first: Unplug the smoker and let it cool before touching internal parts.

Steps:

  • Remove all racks and accessories and run the smoker briefly to see if the noise decreases; if so, adjust or replace noisy racks.
  • Inspect the internal fan blades for bent fins or debris; straighten gently and clean.
  • Check mounting screws on the fan motor bracket and internal panels; tighten any loose hardware.
  • If the noise is from the smoke generator area, inspect the auger or feeder mechanism for chips wedged in the gears and clear them.
  • If the fan motor wobbles or has excessive play, replace the convection fan motor.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Convection Fan Motor
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements